Direct replacement / upgrade for the stock heater core with plastic tanks.
-10AN fittings for inlet / outlet
Only 1 available in this configuration with AN fittings
https://www.ebay.com/itm/203122769694
NEW Full Aluminum Heater Core with -10AN fittings
Moderators: John Brennan, DPDISXR4Ti
-
merkurdriver
- Level 8
- Posts: 6332
- Joined: Tue Jan 21, 2003 4:29 pm
- Location: Northeast Ohio
- Contact:
NEW Full Aluminum Heater Core with -10AN fittings
Direct replacement / upgrade for the stock heater core with plastic tanks.
-10AN fittings for inlet / outlet
Only 1 available in this configuration with AN fittings
https://www.ebay.com/itm/203122769694
-
salukixr4ti
- Level 3
- Posts: 293
- Joined: Mon Dec 04, 2006 9:56 am
- Location: Wichita, Hot, Hot, Hot, Kansas
Re: NEW Full Aluminum Heater Core with -10AN fittings
Look at that beauty!
This ain't no disco...It's Wichita.
-
merkurdriver
- Level 8
- Posts: 6332
- Joined: Tue Jan 21, 2003 4:29 pm
- Location: Northeast Ohio
- Contact:
Re: NEW Full Aluminum Heater Core with -10AN fittings
Side exit -10AN fittings for inlet / outlet routing behind the dash. Exit the firewall in an alternate location.
Great set up for engine swaps when the stock heater core tubes end up in an inconvenient spot with the new engine in.
Only 1 available in this configuration with AN fittings:
https://www.ebay.com/itm/NEW-Ford-Sierr ... 3225270571
Great set up for engine swaps when the stock heater core tubes end up in an inconvenient spot with the new engine in.
Only 1 available in this configuration with AN fittings:
https://www.ebay.com/itm/NEW-Ford-Sierr ... 3225270571
-
merkurdriver
- Level 8
- Posts: 6332
- Joined: Tue Jan 21, 2003 4:29 pm
- Location: Northeast Ohio
- Contact:
Re: NEW Full Aluminum Heater Core with -10AN fittings
Side exit -10AN fittings for inlet / outlet routing behind the dash. Exit the firewall in an alternate location.
Great set up for engine swaps when the stock heater core tubes end up in an inconvenient spot with the new engine in.
Only a handful made in this configuration.
https://www.ebay.com/itm/204466549219
Great set up for engine swaps when the stock heater core tubes end up in an inconvenient spot with the new engine in.
Only a handful made in this configuration.
https://www.ebay.com/itm/204466549219
- Heater core side AN.jpg (312.25 KiB) Viewed 6528 times
- Heater core side ANbox.jpg (248.67 KiB) Viewed 6528 times