Side gap spark plug

XR4Ti / Sierra / Sierra Cosworth Discussions - Questions, problem resolution, general talk, technical tips and modifications.
Post Reply
Merkur Club web site
User avatar
andyofcolumbusmerkur
Level 7
Level 7
Posts: 1266
Joined: Mon Jul 15, 2013 7:58 pm
Location: NE Ohio

Side gap spark plug

Post by andyofcolumbusmerkur »

Anyone have side gapped spark plugs in there car? I was thinking of trying it on an extra set of 764's to see if I can feel a difference. I really don't care about plug life or anything. Anyone use them for an extended time as in on a street car?
You do not pick Merkur, Merkur picks you.
Ed Lijewski
Level 8
Posts: 7812
Joined: Thu Sep 04, 2003 5:53 pm
Location: The Belly of The Beast

Re: Side gap spark plug

Post by Ed Lijewski »

https://en.m.wikipedia.org/wiki/SplitFire_spark_plug

I ran a set in s Scorpio until later at a repair garage tech said the company's P.R. on performance gain was bull excrement.

YMMV
Descartes: "Cogito Ergo Sum"
Lijewski: "Sum Ergo Drive-O. Mucho!
User avatar
andyofcolumbusmerkur
Level 7
Level 7
Posts: 1266
Joined: Mon Jul 15, 2013 7:58 pm
Location: NE Ohio

Re: Side gap spark plug

Post by andyofcolumbusmerkur »

Ya I doubt I would see any improvement on turbo street car. Just for the record I am talking about removing a small amount of electrode and not talking about using different plugs. Like split fire or quad fire or anything.
You do not pick Merkur, Merkur picks you.
zxr250cc
Level 3
Level 3
Posts: 287
Joined: Sat May 27, 2017 11:07 am

Re: Side gap spark plug

Post by zxr250cc »

Hi all,

I would think that indexing the plugs to have the gap aimed at the intake valve would be a better, if slight, improvement than trying to file the plug like some makers did in the past for race version plugs. Just a thought.

Cheers
1986 XR4Ti Mineral Blue Metallic
User avatar
andyofcolumbusmerkur
Level 7
Level 7
Posts: 1266
Joined: Mon Jul 15, 2013 7:58 pm
Location: NE Ohio

Re: Side gap spark plug

Post by andyofcolumbusmerkur »

You can also do that completely different thing. Common on high C/R builds.
You do not pick Merkur, Merkur picks you.
User avatar
andyofcolumbusmerkur
Level 7
Level 7
Posts: 1266
Joined: Mon Jul 15, 2013 7:58 pm
Location: NE Ohio

Re: Side gap spark plug

Post by andyofcolumbusmerkur »

I have heard of washer kits that allow indexing (aiming) of the plug electrode but have never scene those for sale anywhere.
You do not pick Merkur, Merkur picks you.
zxr250cc
Level 3
Level 3
Posts: 287
Joined: Sat May 27, 2017 11:07 am

Re: Side gap spark plug

Post by zxr250cc »

Hi all,

It seems they are still offered in some sites:

https://www.ebay.com/itm/294444767456?c ... 9a7355bbf6

Cheers
1986 XR4Ti Mineral Blue Metallic
User avatar
andyofcolumbusmerkur
Level 7
Level 7
Posts: 1266
Joined: Mon Jul 15, 2013 7:58 pm
Location: NE Ohio

Re: Side gap spark plug

Post by andyofcolumbusmerkur »

If you look at the writing on this vintage package it states the purpose is to "correctly" locate the center electrode. I'm not sure if they mean aiming the open gap towards the exhaust valve or just making sure nothing makes physical contact.
Image
You do not pick Merkur, Merkur picks you.
john keefe
Level 6
Level 6
Posts: 947
Joined: Sat Sep 02, 2006 1:13 pm
Location: Campbell, CA

Re: Side gap spark plug

Post by john keefe »

IIRC, it was old school to either turn the electrode toward center of the squish where air/fuel was traveling slowest, or toward the intake valve (to "start" the burn early while it swirls), or toward the exhaust to get a complete burn and so that the electrode bar acts as a break and keeps the plug gap from getting soaked with fuel... depending on your bias. With turbos/SC's the debate was usually whether the high pressure/flow required turning the electrode away from the intake so it wouldn't "blow out" the spark. If you were building a serious engine, the only sure way to know was to dyno and test all three positions. Lot of work to index 8 plugs for 3 positions.

More often, washers were simply used to make sure the electrode was pointed away from a high dome piston so the piston travel wouldn't squash the electrode, or to recess the plug away from the chamber altogether so there was no chance the dome could hit it.

You painted a line down the plug, or a bright dot on the hex to show where the electrode sat (now you could do it with a sharpy). Probably not needed these days with the maximized combustion chambers, and specific heat length plugs that can only seat to a certain depth.
User avatar
andyofcolumbusmerkur
Level 7
Level 7
Posts: 1266
Joined: Mon Jul 15, 2013 7:58 pm
Location: NE Ohio

Re: Side gap spark plug

Post by andyofcolumbusmerkur »

andyofcolumbusmerkur wrote: Sat Oct 09, 2021 7:23 pm Anyone have side gapped spark plugs in there car? I was thinking of trying it on an extra set of 764's to see if I can feel a difference. I really don't care about plug life or anything. Anyone use them for an extended time as in on a street car?
So anybody side gap the spark plugs on our low compression cars and how long would you say they lasted driving them on the street?
You do not pick Merkur, Merkur picks you.
Post Reply