Shopping for the XR4Ti for Christmas

XR4Ti / Sierra / Sierra Cosworth Discussions - Questions, problem resolution, general talk, technical tips and modifications.
Post Reply
Merkur Club web site
zxr250cc
Level 3
Level 3
Posts: 264
Joined: Sat May 27, 2017 11:07 am

Shopping for the XR4Ti for Christmas

Post by zxr250cc »

Hi all,

I have been gradually hoarding parts and now need the install parts for the front struts and rear poly diff mount. Upper bearings, poly insert, what else? I am ready to do this now, not later...

Cheers
1986 XR4Ti Mineral Blue Metallic
my8950
Level 7
Level 7
Posts: 1106
Joined: Wed Jan 19, 2005 11:07 pm
Location: Detroit

Re: Shopping for the XR4Ti for Christmas

Post by my8950 »

Penetrating oil, vacuum cleaner to pickup all the rust and crap that flakes off in your eyes.
zxr250cc
Level 3
Level 3
Posts: 264
Joined: Sat May 27, 2017 11:07 am

Re: Shopping for the XR4Ti for Christmas

Post by zxr250cc »

Hi all,

I was wanting a vendor to show links to the the strut bearings.I have found the location of the poly bushing for the strut and the diff mount, Also is any other part needed to install struts? Thanks for the advice about the oil and rust...

Cheers
1986 XR4Ti Mineral Blue Metallic
zxr250cc
Level 3
Level 3
Posts: 264
Joined: Sat May 27, 2017 11:07 am

Re: Shopping for the XR4Ti for Christmas

Post by zxr250cc »

Hi all,

I found the strut bearings at Merk Midwest. Anything more needed?

Cheers
1986 XR4Ti Mineral Blue Metallic
User avatar
John Brennan
Level 8
Posts: 11630
Joined: Wed Jun 18, 2003 4:19 pm
Location: Scottsdale, AZ "Summer Is Coming"

Re: Shopping for the XR4Ti for Christmas

Post by John Brennan »

Hard to say, we haven't seen your car. Powerflex bushings? Rack bushings? Steering shaft bearing? Rag joint? Could be any or all...
This is my car, and these are my people!
1989 XR4Ti 5-Speed
2001 BMW Z3 3.0 5-Speed
2015 Fiesta ST 6-Speed
2015 Edge 3.5 V6 Auto/Paddles
zxr250cc
Level 3
Level 3
Posts: 264
Joined: Sat May 27, 2017 11:07 am

Re: Shopping for the XR4Ti for Christmas

Post by zxr250cc »

I think I need blinker fluid as well... :wink:

Sorry, standard mechanics joke when wanting to confuse folks.

I think I am now good to go at the moment. I am really looking forward to feeling the difference when these are all installed in the car.


Oh, I forgot, MERRY CHRISTMAS to all! :D I have enjoyed being in here this year and have appreciated all help offered!

Cheers
1986 XR4Ti Mineral Blue Metallic
timxr8
Level 5
Level 5
Posts: 636
Joined: Mon Feb 12, 2007 11:39 am
Location: Milton, FL

Re: Shopping for the XR4Ti for Christmas

Post by timxr8 »

How are your beam mount bushings? If they are OE, or even brand new rubber, your poly diff mount will fail in short order, so it will take the majority of the force. Those need to be replaced with good poly, or even solid bushings.
Tim Spencer
1988 XR4Ti Duratec project car
2011 Taurus SHO daily driver...not stock.
User avatar
Esteban
Level 7
Level 7
Posts: 1980
Joined: Wed Mar 24, 2010 2:07 am
Location: San Diego

Re: Shopping for the XR4Ti for Christmas

Post by Esteban »

Ive got a set of new solid beam bushings. PM me if you're interested.
zxr250cc
Level 3
Level 3
Posts: 264
Joined: Sat May 27, 2017 11:07 am

Re: Shopping for the XR4Ti for Christmas

Post by zxr250cc »

Hi all,

Thanks for the reply. Are the solid bushings alloy of some sort? Not poly I would guess. Do they use the original bolt or need the longer ones offered by mc2?

Cheers
1986 XR4Ti Mineral Blue Metallic
User avatar
Esteban
Level 7
Level 7
Posts: 1980
Joined: Wed Mar 24, 2010 2:07 am
Location: San Diego

Re: Shopping for the XR4Ti for Christmas

Post by Esteban »

They are alloy and since there's no poly to squish to get the bolts threaded, you can use the stock ones instead of the allen cap screw bolts that MC2 sells.
Post Reply