Motor mount time... ideas?
-
- Level 7
- Posts: 2625
- Joined: Mon Apr 18, 2005 5:06 pm
- Location: Sacramento
- Contact:
Motor mount time... ideas?
I'm going to go ahead and replaced motor mounts on the XR... I had been intending on picking up the gel mounts from Rapido that Ed gushed about, but it seems that's off the table. Any other ideas or recommendations?
- John Brennan
- Level 8
- Posts: 11630
- Joined: Wed Jun 18, 2003 4:19 pm
- Location: Scottsdale, AZ "Summer Is Coming"
Re: Motor mount time... ideas?
How so? NLA?
This is my car, and these are my people!
2015 Fiesta ST
2020 Edge 2.0 Ecoboost
2015 Fiesta ST
2020 Edge 2.0 Ecoboost
-
- Level 7
- Posts: 2625
- Joined: Mon Apr 18, 2005 5:06 pm
- Location: Sacramento
- Contact:
Re: Motor mount time... ideas?
Rapido hasn't answered their phone in a long time. I've called for about two months off and on, and every day at least once a day for the last two weeks. I need another option, I can't keep dragging this out.
- DPDISXR4Ti
- Site Admin
- Posts: 14826
- Joined: Wed Jan 08, 2003 11:40 pm
- Location: New York
Re: Motor mount time... ideas?
Have you left a message? Russ has been battling some health issues but seems to be able to respond to v-mails and/or Facebook messages.
Brad
-
- Level 7
- Posts: 2625
- Joined: Mon Apr 18, 2005 5:06 pm
- Location: Sacramento
- Contact:
Re: Motor mount time... ideas?
Nothing ever picks up, it rings forever.
I heard Russ was having some issues and I don't wanna hound the guy, so I'm looking for other options while takes care of himself.
I can't help but wonder if some other mount works here... Both my Jeep and my Mercedes have very similar ones... I just don't have an XR mount free for measurements... Not that anything I had would be an accurate measure of new height.
I heard Russ was having some issues and I don't wanna hound the guy, so I'm looking for other options while takes care of himself.
I can't help but wonder if some other mount works here... Both my Jeep and my Mercedes have very similar ones... I just don't have an XR mount free for measurements... Not that anything I had would be an accurate measure of new height.
-
- Level 7
- Posts: 2625
- Joined: Mon Apr 18, 2005 5:06 pm
- Location: Sacramento
- Contact:
Re: Motor mount time... ideas?
I got through! w00t!
-
- Level 7
- Posts: 1069
- Joined: Sat Sep 02, 2006 1:13 pm
- Location: Campbell, CA
Re: Motor mount time... ideas?
TBird Supercoupe mounts work. I'm not sure they cross-reference to other vehicles, but the "donut" is almost exactly same. IIR, you might have to tweak the bolt(s) to make it work. And, you'll probably have to buy the whole bracket assembly just to get the donut, but back when it wasn't all that expensive.
-
- Level 7
- Posts: 2625
- Joined: Mon Apr 18, 2005 5:06 pm
- Location: Sacramento
- Contact:
Re: Motor mount time... ideas?
$14!!!! Oh my!
-
- Level 8
- Posts: 8416
- Joined: Thu Sep 04, 2003 5:53 pm
- Location: The Belly of The Beast
Re: Motor mount time... ideas?
Russ typically responds quickly when tagged on MCA FB. Plus he occasionally comments on posts so replying to his comment gets his attention.
YMMV
YMMV
Descartes: "Cogito Ergo Sum"
Lijewski: "Sum Ergo Drive-O. Mucho!
Lijewski: "Sum Ergo Drive-O. Mucho!
-
- Level 7
- Posts: 2625
- Joined: Mon Apr 18, 2005 5:06 pm
- Location: Sacramento
- Contact:
Re: Motor mount time... ideas?
Facebook.