Wiper Delay Switch Bulb Replacement
Wiper Delay Switch Bulb Replacement
Replaced the bulb on the wiper delay switch on my 88XR. The cover comes off easily using a small flat blade screwdriver by gingerly prying side tabs on switch. I used a 60ma grain of wheat bulb which has solid metal leads, which solder into holes on the terminals.
- Attachments
-
- 20221019_130943.jpg
- (1.02 MiB) Not downloaded yet
-
- 20221019_130504.jpg (1.72 MiB) Viewed 2427 times
-
- 20221019_130433.jpg (1.54 MiB) Viewed 2427 times